Join our mailing list!

Custom Bag
Women's Apparel

  Home > Candle Decal Paper >

Inkjet Waterslide Decal Paper
Inkjet Waterslide Decal Paper
Our Price: $23.99

Product Code: 25C

choose a color


choose a size


Inkjet Decal Paper Starter Pack
25 Sheets
8.5" X 11" - Works with Inkjet Printers
Inkjet paper Instructions
Always use Bel Papers

How To Apply Inkjet waterslide decal paper

  • Step #1: Design your decals using any graphic software program. (Use 8 1/2 " x 11" sheet BEL INK JET Decal Paper or cut sheet into half if desired.)

  • Step #2: Set your printer as follows:

    • Resolution = Best
    • Paper = Photo Gloss
    • (Print your decal on the glossy side of BEL INK JET Decal Paper.)

  • Step #3: Spray your printed sheet evenly with Krylon Acrylic Crystal Clear High Gloss spray until the sheet has a shine (2-3 coats). Allow 30 to 60 minutes to dry and set. (This product is available at any craft or hardware store such as Loews, Home Depot, Ace Hardware, Walmart, etc. Any acrylic clear coat spray will work.)

  • Step #4: Cut out your image using a standard pair of sharp household scissors.

  • Step #5: Place decal into a cup of clean water for 45-60 seconds and remove when the thin decal film begins to slip along backing. (Discard backing material after the decal has been removed)

  • Step #6: Apply decal to clean surface; ceramic, glass, metal, plastic, soap, candles, mylar balloons, model trains, planes, cars, etc.

Average Customer Review: 4.5 of 5 Total Reviews: 6 Write a review.

  3 of 3 people found the following review helpful:
Few Tips about the ink jet paper May 18, 2017
Reviewer: Rick Ritchie from saint paul, MN United States  
I have purchased paper from different sellers and this is by far the best & thinnest I have USED

the best way to know when the film will slide off the paper is to place it in water, paper side up when the paper has soaked up the water its ready IT ALSO helps keeping the decal from rolling up on itself

I use photo matte settings and normal print and my decals come very clean and good ink coverage

using the best setting they came out darker meaning my orange looked more link red
play with the setting with scrap decal paper
all printers work different   my is a HP

Was this review helpful to you?

  2 of 3 people found the following review helpful:
Good paper, but there are issues February 5, 2016
Reviewer: Darrell from Hockley, TX United States  
The end result was OK, but there were issues. Slow shipping-DecalPaper.com ships via the Postal Service. Took a long time for the paper to arrive and when it did, it was crammed in my mailbox and bent. So, after having to throw away 6 or 7 sheets for creasing, this becomes very expensive. Color-plan on using several sheets to dial in the color you want. The paper is thick, which is good for durability. For my application where I put a finish over it, it took me many extra coats of finish with sanding between to get good results. I was doing several guitar projects and each time the decal had to sit in water for over 3 minutes for it to release. So be patient so you don't damage your decal. In the end the paper is of good quality, but factoring in my experience and the shipping, I doubt I would order this paper again, I would try a different brand/retailer.

Was this review helpful to you?

  1 of 2 people found the following review helpful:
Great idea September 9, 2015
Reviewer: dwe from NY United States  
Printing is great. The issue/s I had came from the instructions which say to place in water for "45-60 seconds." The first one I put in almost immediately separated from the backing and I am stupidly counting to 45 seconds as the decal itself is floating around the water. I adapted the time and the average was about 10 seconds or less.

The other issue was more my fault. I traced everything out, cut it to fit but did not grasp that once the decal is loose there is no real way to "match up" anything. The film is so thin is is extremely hard to manage larger pieces - part of that also ties into the release of the film almost instantly once placed in the water. NOTE: One review said it takes longer than the 45 - 60 seconds the instructions suggest once coated with the clear coat but if you only do the 1 -3 coats there is not way it takes longer than 30 seconds, let alone 60.

I am considering trying ink jet printable vinyl next project to see if it is more manageable.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Work great for restoration projects August 5, 2015
Reviewer: Glen from Supply, NC United States  
These media sheets are a must for my arcade machine restoration work. Invaluable tools.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Happy Customer. April 24, 2014
Reviewer: JAFO from Singapore  
Excellent! Delivery was fast and packaging was good!
Have not start printing but at the first observation, the paper quality looks superb!

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Candle Decal Paper
Wood Decal Paper
Soap Decal Paper
Inkjet Decal Paper
Ceramic and Glass Decals